Your cart is empty
Showing 1 - 4 of 4 matches in All departments
Snuza Pico is the next generation wearable smart monitor for babies. Monitor your baby's abdominal movement, temperature and body position from your smart phone or tablet. Snuza PICO is 40% smaller than the Snuza HERO, and vibrates after 15 seconds of no movement in an effort to rouse your baby to resume abdominal movement. This is then followed by a loud alarm if a further 5 seconds passes with no abdominal movement. The Snuza Pico app allows for real-time view of all the parameters being measured - Abdominal Movement Rate, Skin Temperature, Body Position and even Fall Detection if your baby takes a tumble! The Snuza Pico can pick up external movements and it is therefore not suitable for co-sleeping babies or when bed-sharing. It is advisable not to use the Snuza Pico when the baby is in motion, e.g. in a car seat or a stroller. App - Available for iOS and Android.
Why am I getting false breathing alarms?
The Pico is designed to sense abdominal movement and so if there is no movement detected it will alarm. To avoid false alarms ensure you have attached Pico firmly to the nappy as indicated in the Quick Start Guide and place the Pico where the baby will not lie on the device.
The Snuza Pico alarms while I’m feeding or changing the baby!
There is a pause function on the Pico that can be activated from the smart phone or by un-clipping the Pico and briefly pressing the power button.
Can the app be loaded onto multiple phones to simultaneously pair with one Snuza Pico?
The app can be loaded onto multiple phones but only one phone can be connected to the Snuza Pico at a time.
Can multiple Snuza Pico’s be monitored from the same phone?
Yes, up to a maximum of three Snuza Pico’s can be connected to one smart phone or tablet.
I didn’t receive the registration email?
Please first check your junk mail folder if you don’t find the email try login with your username, it will offer to send the confirmation email again. Alternately you could go to http://connect.snuza.com/send-confirmation and enter the email you used to register. If the email is not found simply register with it. If you still experience problems please send your email address and username to firstname.lastname@example.org so we can investigate.
How do I connect a second user to the Pico?
The easiest way is to log into the second phones Snuza app with the same username and password (note only one phone can be connected to the Pico at a time). Alternately, the Pico can be shared with a second registered user via the Snuza Connect website connect.snuza.com by clicking on “Devices” and sending an invite by entering an email address under “Secondary Users”. This invite will need to be accepted by the recipient, and the recipient must have an account.
The Pico won’t connect, what can I do?
Check that the Pico is on. Check if the blue connection light is flashing, if it is, check that other smart devices in the house are not connected to it. Try exiting or swiping the app away and restarting it. Try resetting the Pico by holding the power button for longer than 10 seconds, remember to turn it on again. If all of these don’t help send your serial number to email@example.com so we can investigate.
The graphs have disappeared from the iPhone app how do I get them back?
With the Pico connected to the app, click on the baby’s name or picture to navigate to the settings page. Then switch on the appropriate switches under display settings. Alternatively, you can go to the bottom of the settings page and click the defaults button.
The Snuza Pico is falling off the diaper.
First make sure that the top lever is seated correctly, then ensure that the thin flap of the diaper is folded over the ticker part, which is what the clip grips on to.
The Clip is very loose and not seated properly.
The clip is designed to be replaceable and will unseat if moved more than 60 degrees past the closed position. There is a friction stop at 60 degrees, but with a little force, it can be moved beyond this. To re-seat the clip. please follow this How To video:
The ‘tick’ functionality has gone.
The firmware is continuously being improved to make the product better. As part of this process, a new breathing detection algorithm was developed which is vastly more effective than before. The downside is that the ‘tick’ functionality has temporarily been removed while we work on making it compatible with the new improved algorithm.
Read the basic tips for using your Snuza Pico smart wearable movement monitor below.
Snuza Pico is a mobile movement monitor so the non-contact sensor must always be in contact with the baby’s tummy. The non-contact sensor however will still detect movement if it loses contact with the tummy for a few seconds.
To prevent unnecessary false alarms caused by SnuzaŽ Pico being out of range of abdominal movement:
Please note: Snuza abdominal movement monitors detect the slightest movement, including movement from external sources such as when travelling in a vehicle, pushing a pram, etc. SnuzaŽ Pico should only be relied upon when there is no external movement present, i.e. when the vehicle, pram, carry cot, etc. is stationery.
Tips for attaching the Snuza Pico
Attaching the SnuzaŽ Pico to clothing
If you follow these guidelines properly, you can rest assured that baby’s every movement is being monitored.
Recharging the Battery
The Snuza Pico makes use of a rechargeable battery and is a sealed unit.
To charge the Pico, place it in the USB charging station (Supplied with the Pico) for 2 hours.
A full charge allows for up to 2 weeks of usage.
SnuzaŽ Go! Baby monitor is a wearable clip-on baby monitor, which is attached to baby's diaper, ensuring normal abdominal movement is maintained. The ultra-sensitive flexible tip is a vibrating movement monitor, designed to detect the slightest of movements. If no movement at all is detected for a period of 20 seconds, SnuzaŽ Go! will emit an audible alarm to alert you. The 20-second period can be reduced to 15 or 18 seconds if preferred. SnuzaŽ Go! will also alert you if your baby's movements are very weak or fall to less than eight movements per minute. The SnuzaŽ Go! can pick up external movements and it is therefore not suitable for co-sleeping babies or when bed-sharing. It is advisable not to use the SnuzaŽ Go! when the baby is in motion, e.g. in a car seat or a stroller.
Why SnuzaŽ Lumonite? SnuzaŽ Lumonite Rechargeable LED Light is an easy-to-use flashlight. Lumonite can be left ON as a night light in your baby's nursery, or it can be left OFF and will automatically turn ON if the main power fails, making it the ideal solution for an emergency light in any room in the house. Charged via induction, simply plug the recharger into a mains power plug and store Lumonite in the recharger. Return it to the charger when you've finished using it and you'll always have a convenient and easy-to-find light. Lumonite night light has 3 brightness settings as well as an SOS flashing function for an emergency situation. It is the ideal baby monitor accessory to give you peace of mind.
If your SnuzaŽ Hero or Go! has an SE on the label, use only CR2
batteries. If it does not say SE on the label of your monitor, use only
the SnuzaŽ CR14250 3.0v battery. If you have the HERO or GO with the
letters SE next to the word HERO or GO on the product label, you need
one of the following batteries:
If you have the HERO without the letters SE next to the word HERO on the product label, you need one of the following batteries:
We have tested the SAFT LS, and will work also as a substitute. Batteries have three parts, an anode (-), a cathode (+), and the electrolyte. The cathode and anode (the positive and negative sides at either end of a traditional battery) are hooked up to an electrical circuit. The chemical reactions in the battery causes a build-up of electrons at the anode. If the SAFT battery has been sitting on the shelf for a while, the chemical reactions become dormant, and there are no electrons being built up for the battery to work efficiently, which means that initially it will indicate that the battery is low. All you do then is switch it on and off a few times (5 to 10) which should reverse the dormant state, and help with the build-up of electrons. The device should then work fine.
You may like...
Johnson's Baby Top-to-Toe Bath (300ml)
R41 Discovery Miles 410
Johnson's Vita Rich Soothing Rose Body…
R44 Discovery Miles 440
South Park: The Fractured But WholeNot available
Blu-ray disc (1)
Licensed Rubber Keychain - Harry Potter…
R59 Discovery Miles 590
Horrockses 100% Cotton Panelled Cellular…
Paper Mate Inkjoy 100 Capped Ballpoint…
R4 Discovery Miles 40
My Blood Divides And Unites - Race…
Jesmane Boggenpoel Paperback
Johnson's Aloe Vera Baby Oil (200ml)
R43 Discovery Miles 430
Sony PlayStation Classic Console