Tin Foil and Its Combinations for Filling Teeth (Paperback)

Excerpt: ... tin fillings 50 are subject to a large amount of attrition, they wear away sooner or later, but this is not such a great detriment, for they can easily be repaired or replaced, and owing to the concave form produced by wear the patient is liable to know when a large amount has been worn away. That portion against the wall of the cavity is the last removed by wear, so that further caries is prevented so long as there is any reasonable amount of tin left. If at this time the tooth has become sufficiently solidified, proper anchorage can be cut in the tin or tooth, one or both, as judgment dictates, and the filling completed with gold. A tin filling, confined by four rather frail walls, may condense upon itself, but it is so soft and adaptable that the force which condenses it continually secures the readaptation at the margin; thus there will be no leakage or caries for years. Owing to its softness and pliability, it may be driven into or onto the tubuli to completely close them from outside moisture, and with a hand burnisher the tin can be made to take such a hold on dry, rough tubuli that a cutting instrument is necessary to remove all traces of it. Tin foil has been found in the market that under a magnifying glass showed innumerable tiny black specks, which, upon being touched with an instrument, crumbled away, leaving a hole through the 51 foil. More than likely, some of the failures can be attributed to the use of such foil. Good tough foil, well condensed by hand or mallet force, stays against the walls of a cavity and makes a tight filling, and ought to be called as near perfect as any filling, because it preserves the tooth, and gives a surface which will wear from five to twenty years, depending upon the size and location of the cavity and tooth-structure. Buccal cavities in the first permanent molars, and lingual cavities in the superior incisors, filled for children from six to eight years of age, are still in good condition after a...