The Mastery of the Air (Paperback)

Excerpt: ...the other propeller, working at full speed, would probably overturn the machine before the pilot could cut off his engine. Beyond the propellers there are two little vertical planes which can be moved to one side or the other by a control lever in front of the pilot's seat. These planes or rudders steer the machine from side to side, answering the same purpose as the rudder of a boat. In front of the supporting planes there are two other horizontal planes, arranged one above the other; these are much smaller than the main planes, and are known as the ELEVATORS. Their function is to raise or lower the machine by catching the air at different angles. Comparison with a modern biplane, such as may be seen at an aerodrome on any "exhibition" day, will disclose several marked differences in construction between the modern type and the earlier Wright machine, though the central idea is the same. CHAPTER XXVI How the Wrights launched their Biplane Those of us who have seen an aeroplane rise from the ground know that it runs quickly along for 50 or 60 yards, until sufficient momentum has been gained for the craft to lift itself into the air. The Wrights, as stated, fitted their machine with a pair of launching runners which projected from the under side of the lower plane like two very long skates, and the method of launching their craft was quite different from that followed nowadays. The launching apparatus consisted of a wooden tower at the starting end of the launching ways-a wooden rail about 60 or 70 feet in length. To the top of the tower a weight of about 1/2 ton was suspended. The suspension rope was led downwards over pulleys, thence horizontally to the front end and back to the inner end of the railway, where it was attached to the aeroplane. A small trolley was fitted to the chassis of the machine and this ran along the railway. To launch the machine, which, of course, stood on the rail, the propellers were set in motion, and the 1/2-ton weight...